A great new range of ready-painted lineside accessories. These models are cast in an acrylic polymer plaster mix - a perfect material with which to create some very convincing detail, and they are then painted and distressed for authenticity.

Designed and produced in Edinburgh for PECO by Jim Burns. The result is a very convincing and realistic looking model that will fit in most areas of a layout.

A great new range of ready-painted lineside accessories. These models are cast in an acrylic polymer plaster mix - a perfect material with which to create some very convincing detail, and they are then painted and distressed for authenticity.

Designed and produced in Edinburgh for PECO by Jim Burns. The result is a very convincing and realistic looking model that will fit in most areas of a layout.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

All kits comprise a bag of load material, such as coal or sand, plus sections of board that are cut to size to fit the desired wagon. The modeller, using a PVA adhesive, secures the materials on the cut boards and places the load inside the wagon for instant effect. The additional benefit, apart from the realism, is that some valuable weight is added to what might otherwise be a very light vehicle. Especially useful in an N scale wagon!

The N scale kits contain enough material for up to 6 wagons. Full instructions are provided in the packs.

The NEW West Highland Line Platform Shelter Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

Built by the North British Railway, the West Highland Line travelled through a stunning part of the country and soon became popular with tourists as well as providing an essential link to the outside world from the sparsely populated Highland areas. The station buildings are particularly attractive and our kit of the station at Arisaig personifies that appealing design.

The NEW West Highland Line Station Building Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

The NEW West Highland Line Platform Mounted Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

FOOTPRINT (INC. ROOF OVERHANG) 65 X 65mm

The NEW West Highland Line Signal Box Laser-Cut Kit

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

The NEW Rannoch Station Wooden Laser-Cut Kit

The style of Rannoch Station building, built in 1894, is typical of the type of structure found on the North British-built line from Glasgow to Fort William. Sitting on an island platform this is a long building, so consequently the model created from this kit is certainly impressive! By contrast the platform-mounted signal box is quite diminutive when compared with the station, but both structures possess the stylish "Swiss Cottage" style of construction and consequently are very attractive.

Despite its size we have designed the station kit to be as easy to construct as possible, with carefully designed parts that fit snuggly together and the assembly instructions are clear and informative. It would not surprise us if the signal box kit is adapted for other uses, such as a shelter, tea room, waiting room or greenhouse: it has many possibilities! The kits feature some incredible detail and texture, something that we have been working really hard to achieve - so much better than the basic appearance of so many other laser cut kits available on the market.

FOOTPRINT (INC. CANOPY OVERHANG) 460mm x 114mm

The NEW TT:120 Laser-Cut Wooden Platform Shelter.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

The platform shelter model replicates a typical style constructed, appropriately, in wood.

Laser cut wooden kit with plastic chimney pot detail.

A craft knife, needle files, glue (impact adhesive or PVA work well. Superglue can also be used apart from the glazing) and paints are required.

The lineside hut kits contains components for two buildings. Carefully designed and thought through, these kits are a delight to build.

 

Designed for modellers to give access to awkward corners of the layout, the NEW PECOscene Pro-Grass Detailer Applicator is a great addition to the range. Featuring a comfortable handle to hold and a long, slender neck to reach into cramped areas of the layout with ease, the applicator makes the addition of static grass around structures and track so much easier to achieve. Conveniently, the applicator is also supplied with two interchangeable sieve heads - one flared, the other straight, both of which can accommodate up to 6mm static grass fibres, and give the modeller options when deciding how much coverage is required. Powered by a 9v battery (not included), the applicator switch also lights up to indicate when power is on, a useful reminder! 

Our 'Shows You How' Booklet No 13 Detailing the Landscape and Youtube video clips show the effects that can be created.

Monkton Combe, einst eine Zwischenstation der lange geschlossenen Camerton-Filiale in der Nähe von Bath, rückte 1952 ins Rampenlicht, als es als Drehort für die berühmte Ealing-Komödie „The Titfield Thunderbolt“ ausgewählt wurde.

Für den Zusammenbau werden ein Bastelmesser, Feilen und flüssiger Polyzement benötigt

Zur Verwendung mit den Plattformkanten LK-12103 und LK-12104 sowie den Plattformrampenkanten LK-12105 und LK-12106.

Das TT:120-Plattformsystem umfasst verschiedene Arten von Plattformkanten, Rampenkanten und Oberflächen, mit denen Plattformen jeder Größe und Form erstellt werden können. Die Bahnsteigkante ist für den Einsatz entlang des PECO TT:120-Gleises konzipiert und berücksichtigt die Höhe der Schwellen, was zu einer genauen Bahnsteighöhe von 3 Fuß vom Schienenkopf führt. Die Bahnsteigplatten können auch für Kratzbauwerke und Gebäude verwendet werden.

Technische Spezifikationen

5 Blätter 133 m x 76 mm, nominell 1 mm dick.

Für den Zusammenbau werden ein Bastelmesser, Feilen und flüssiger Polyzement benötigt

Zur Verwendung mit den Plattformkanten LK-12103 und LK-12104 sowie den Plattformrampenkanten LK-12105 und LK-12106.

Das TT:120-Plattformsystem umfasst verschiedene Arten von Plattformkanten, Rampenkanten und Oberflächen, mit denen Plattformen jeder Größe und Form erstellt werden können. Die Bahnsteigkante ist für den Einsatz entlang des PECO TT:120-Gleises konzipiert und berücksichtigt die Höhe der Schwellen, was zu einer genauen Bahnsteighöhe von 3 Fuß vom Schienenkopf führt. Die Bahnsteigplatten können auch für Kratzbauwerke und Gebäude verwendet werden.

Technische Spezifikationen

5 Blätter 133 m x 76 mm, nominell 1 mm dick.

Für den Zusammenbau werden ein Bastelmesser, Feilen und flüssiger Polyzement benötigt

Zur Verwendung mit LK-12104 Steinplattformkanten und LK-12107 Ziegelsteinpflaster oder LK-12108 Betonoberfläche.

Das TT:120-Plattformsystem umfasst verschiedene Arten von Plattformkanten, Rampenkanten und Oberflächen, mit denen Plattformen jeder Größe und Form erstellt werden können. Die Bahnsteigkante ist für den Einsatz entlang des PECO TT:120-Gleises konzipiert und berücksichtigt die Höhe der Schwellen, was zu einer genauen Bahnsteighöhe von 3 Fuß vom Schienenkopf führt.

Technische Spezifikationen

2-Hand-Paare, jede Rampe 75 mm lang

Für den Zusammenbau werden ein Bastelmesser, Feilen und flüssiger Polyzement benötigt

Zur Verwendung mit LK-12103 Ziegelstein-Plattformkanten und LK-12107 Ziegelsteinpflaster oder LK-12108 Betonoberfläche.

Das TT:120-Plattformsystem umfasst verschiedene Arten von Plattformkanten, Rampenkanten und Oberflächen, mit denen Plattformen jeder Größe und Form erstellt werden können. Die Bahnsteigkante ist für den Einsatz entlang des PECO TT:120-Gleises konzipiert und berücksichtigt die Höhe der Schwellen, was zu einer genauen Bahnsteighöhe von 3 Fuß vom Schienenkopf führt.

Technische Spezifikationen

2-Hand-Paare, jede Rampe 75 mm lang

Für den Zusammenbau werden ein Bastelmesser, Feilen und flüssiger Polyzement benötigt

Zur Verwendung mit LK-12106 Steinrampen und LK-12107 Ziegelsteinpflaster oder LK-12108 Betonoberfläche.

Das TT:120-Plattformsystem umfasst verschiedene Arten von Plattformkanten, Rampenkanten und Oberflächen, mit denen Plattformen jeder Größe und Form erstellt werden können. Die Bahnsteigkante ist für den Einsatz entlang des PECO TT:120-Gleises konzipiert und berücksichtigt die Höhe der Schwellen, was zu einer genauen Bahnsteighöhe von 3 Fuß vom Schienenkopf führt.

Technische Spezifikationen

6 Stück, jeweils 133 mm lang

Für den Zusammenbau werden ein Bastelmesser, Feilen und flüssiger Polyzement benötigt

Zur Verwendung mit LK-12103 Ziegelstein-Plattformkanten und LK-12107 Ziegelsteinpflaster oder LK-12108 Betonoberfläche.

Das TT:120-Plattformsystem umfasst verschiedene Arten von Plattformkanten, Rampenkanten und Oberflächen, mit denen Plattformen jeder Größe und Form erstellt werden können. Die Bahnsteigkante ist für den Einsatz entlang des PECO TT:120-Gleises konzipiert und berücksichtigt die Höhe der Schwellen, was zu einer genauen Bahnsteighöhe von 3 Fuß vom Schienenkopf führt.

Technische Spezifikationen

2-Hand-Paare, jede Rampe 75 mm lang

Lasergeschnittener Holzbausatz mit Kaminaufsatzdetail aus Kunststoff und Glasplatte.

Benötigt werden ein Bastelmesser, Nadelfeilen, Kleber (Schlagklebstoff oder PVA eignen sich gut. Neben der Lasur kann auch Sekundenkleber verwendet werden) und Farben.

Passend für die PECO TT:120-Schiene (nicht im Lieferumfang enthalten).

Kleiner Güterschuppen mit durchgehendem Abstellgleis, basierend auf Bovey in South Devon. Die Türen können entweder in offener oder geschlossener Position fixiert werden und der Innenraum verfügt über detailliertes Mauerwerk, Dachsparren, Ladeplattform und Warenbüro.

Technische Spezifikationen

Länge 100 mm

Breite 110 mm