Code 55

Verwenden Sie die Metallverbinder SL-310 und die Verbindungsschwellen SL-1208. Verwenden Sie die Isolierverbinder SL-311, um isolierte Gleisabschnitte zu erstellen (bei Verwendung der DCC-Steuerung sind diese nicht erforderlich).

Einer der großen Vorteile von TT:120 besteht darin, dass die 12-mm-Spurweite korrekt auf die Standardspurweite (4 Fuß 8,5 Zoll) übertragen werden kann, wie sie im gesamten britischen Eisenbahnnetz verwendet wird. Der ausgeklügelte Schienenabschnitt des PECO-Codes 55 kombiniert Festigkeit und Haltbarkeit mit einem Äußerst realistisches Erscheinungsbild – Bei TT:120 stellt die sichtbare Höhe der Schiene korrekt die 113-Pfund-Schiene mit flachem Boden dar. Die flexible Schwellenbasis ist detailliert mit feiner Holzmaserung und Spikes durch die BR1-Grundplatten von British Railways unter den Schienen versehen, eine Kombination, die weiterhin weit verbreitet ist Wird auf den britischen Eisenbahnen verwendet.

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 180mm
Frog angle 11.25 degrees

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

As with the PECO Streamline track system we use the unique double-foot Code 55 rail for robustness, and also for the finer appearance of the track. This means that both Setrack and Streamline can be connected together. We have started with just the one radius, no. 2, at 310mm/12.2in., and the length of the medium radius Streamline turnout (SLU1295 and SLU1296) is the same as one standard and one small straight section. That will allow a siding to be inserted into a loop of the Setrack using the Streamline turnout without upsetting the geometry. Modellers should use the PL82 Pecolectrics Power Feed Joiners to connect power to the track: the joiners at one end of two pieces of track can easily be pulled off to allow the Power Feed Joiners to connect up. All Setrack products are supplied in hanging packs containing either 4 or 8 pieces and sold to you in singles.

Technical Specifications:

Length TBC
Radius TBC
Frog angle TBC

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 135mm
Radius 466mm
Frog angle 11.25 degrees

Code 55

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these are not required).

One of the great advantages of TT:120 is that the 12mm gauge track correctly scales out as standard (4' 8.5") gauge, as used all over Britain's railway network. The ingenious rail section of PECO code 55 combines strength and durability with a highly realistic appearance – In TT:120 the visible height of the rail correctly represents 113lb flat bottom rail. The flexible sleeper base is detailed with fine wood grain and spikes through British Railways’ BR1 baseplates under the rails, a combination that continues to be widely used on Britain’s railways.

Technical Specifications:

Length 135mm
Radius 466mm
Frog angle 11.25 degrees

Code 55

Unifrog

Verwenden Sie Metallschienenverbinder SL-310 und Verbindungsschwellen SL-1208.

Einer der großen Vorteile von TT:120 besteht darin, dass die 12-mm-Spurweite korrekt auf die Standardspurweite (4 Fuß 8,5 Zoll) übertragen werden kann, wie sie im gesamten britischen Eisenbahnnetz verwendet wird. Der ausgeklügelte Schienenabschnitt des PECO-Codes 55 kombiniert Festigkeit und Haltbarkeit mit einem Äußerst realistisches Erscheinungsbild – Bei TT:120 stellt die sichtbare Höhe der Schiene korrekt die 113-Pfund-Schiene dar, die bei britischen Eisenbahnen weiterhin weit verbreitet ist. Die Weichen entsprechen den NEM-Standards und die Geometrie mit mittlerem Radius entspricht weitgehend dem B6-Standard der British Railways .

Technische Spezifikationen

Länge - 180 mm

Austrittswinkel - 11,25°

Radius – Nominal 922,6 mm/36,3 Zoll

Code 55

Unifrog

Verwenden Sie Metallschienenverbinder SL-310 und Verbindungsschwellen SL-1208.

Einer der großen Vorteile von TT:120 besteht darin, dass die 12-mm-Spurweite korrekt auf die Standardspurweite (4 Fuß 8,5 Zoll) übertragen werden kann, wie sie im gesamten britischen Eisenbahnnetz verwendet wird. Der ausgeklügelte Schienenabschnitt des PECO-Codes 55 kombiniert Festigkeit und Haltbarkeit mit einem Äußerst realistisches Erscheinungsbild – Bei TT:120 stellt die sichtbare Höhe der Schiene korrekt die 113-Pfund-Schiene dar, die bei britischen Eisenbahnen weiterhin weit verbreitet ist. Die Weichen entsprechen den NEM-Standards und die Geometrie mit mittlerem Radius entspricht weitgehend dem B6-Standard der British Railways .

Technische Spezifikationen

Länge - 180 mm

Austrittswinkel - 11,25°

Radius – Nominal 922,6 mm/36,3 Zoll