Pack includes 24 9mm x 16mm classic Great Western style signal box windows.

Pack contains 3 x 63mm lengths of etched brass laddering and includes safety cages and fixings.

4 x 143mm lengths of laddering.

Pack of 2 which can also be used as cold frames. Approximately 32mm long and 22mm wide each. Glue and paints required to complete model.

If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 2 x 100mm lengths of ramp fencing
‚Ģ 8 assorted gates

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 700mm of fencing.

This common type of water tower is usually found tucked away and used to supply individual water cranes (2 included with kit - Ratio Water Crane kit 212 is available if more are required). The water flow was controlled from the hand wheels on the cranes. Supplied with pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 34mm x 29mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Our model faithfully captures the mitred edges of the prototype; this pack contains 600mm of fencing.

Kit includes:
‚Ģ 2 x 120mm ramps (1 L/H, 1 R/H)
‚Ģ 2 large gates and 2 small gates

After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a Southern Railway rail built signal, either as a Home, Distant or combined Home and Distant signal. Glue and paints required to complete model.

Placed at the foot of platform end ramps, barrow crossings allow light goods and luggage to be transferred across a double track to an adjoining platform by railway staff. Glue and paints required to complete model.

A model of the station at Castle Cary, Somerset. Although of typically GWR design, it can be adapted to suit that of other railway companies. The kit includes notice boards, telephone and first aid boxes. See also Modelscene Station Staff 5059, Passengers Standing Sets A and B 5057 and 5058 and Passengers Seated Ref. 5056. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 210mm x 135mm (inc. canopy)

With this kit you can add a 2nd canopy to Station Building kit (Ref 204) for use on an island platform, or alternatively as an awning on the 'taxi side' of the station building. Supplied with some pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains:
‚Ģ 340mm of Straight Fencing
‚Ģ 2 x 102mm lengths of Ramp Fencing
‚Ģ 1 Large and 1 Small Gate
‚Ģ 2 Ramp Gates
‚Ģ 1 Ticket Gate

Kit and scratch builders accessory, 724mm of station canopy valancing and 6 notice boards.

These simple kit lamps can represent oil, gas or electric lamps. Supplied in a pack 4; supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model.

The 2 Trestles as supplied in kit 241 are available separately, ideal for use with Peco NB-38 and 39 Girder Bridge sides or for those who enjoy scratchbuilding and kit bashing. Footprint: 61mm x 12mm, 125mm Height

This kit gives you the opportunity to make an interesting bridge for your layout. The design is fairly universal across the world, often found spanning tracks in urban areas or bridging rivers in the country. This style of truss girder bridge is also very common in mountainous regions. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

This kit is designed to extend the Steel Truss Bridge with Stone Piers (Ref 240). Supplied with decking and truss girder sides together with a single trestle. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Size: Span 144mm. Trestle: 61mm x 12mm, 125mm Height

This kit represents a typical Goods Shed, essential to most railway stations for the storage and transfer of dry goods to road vehicles for distribution. The Peco range of wagon loads (e.g. NR-203 Timber Loads) for 10 and 15 ft. wagons provide realistic deliveries. Supplied with some pre-coloured parts, painting and/or weathering can add realism; glue is required to complete this model. Footprint 90mm x 70mm

The essential items for all stations until recently was a goods shed. Inside, dry goods were stored and transhipped from road to rail via the internal platform. The shed usually had a crane (Ref 531) or hoist (Ref 543) inside, whilst pallets and sacks (Ref 514) would be seen stacked around the site. A good example of this type of goods shed can still be seen standing in Ross on Wye, long after the railway has disappeared. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint 155mm x 170mm

Additional piers for the 251 Viaduct kit, can also be used as supports for the NB-38 and 39 Girder Bridge Sides. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 88mm, width 63mm each