SORT BY
PAGE

389 Products Found

Decoupler Manual

Manual uncoupler for use with 009 couplings

Wagon Turntable

Wagon Turntables were usually used to turn wagons through 90 degrees to access spur roads into warehouses etc. For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is compatible with the Peco 009 Setrack rigid track system.

Buffer Stop, Hydraulic

Excellent model of the impressive buffer stops seen at most main line stations. Will give any model railway that authentic 'big city terminus' look.

Buffer Stop, Sleeper-built

Realistically simulated woodgrain mouldings with ballast textured surface on top. recessed to accommodate couplings.

6ft Way Gauge

A small but useful item to ensure the accurate spacing of double tracks in 00/H0 along both straight and curved sections. Also gauges platform height to the recommended 14mm (3ft 6ins in 4mm scale).

Re-Railer

Makes re-railing steam locos and bogie vehicles simple - less handling too.

Also suitable for re-railing 009/H0e locomotives and stock.

6' Way Gauge

A small but useful item to ensure the accurate spacing of double tracks in N along both straight and curved sections. Also gauges platform height to the recommended 7mm (3ft 6ins in 2mm scale).

Decoupler Manual

Uncouplers - Manual type,for Elsie couplings and other similar types (2 per pack).

Decoupler Magni-Simplex type

Magnetic uncoupler for use with stock fitted with the Peco Magni Simplex (R-3) couplings.

Insulated Rail Joiners

Insulated Rail Joiners - Plastic for both Code 55 and Code 80 track. Design prevents adjacent rails from touching whilst holding them in alignment.

Insulated rail joiners are required to provide electrical breaks where Electrofrog turnouts are used, for more details see our Wiring the Layout publications Nos 4 and 21.

Conducting Rail Joiners

Conducting Rail Joiners - Nickel silver for both Code 55 and Code 80 track

Decoupler A/HD type

For use with Peco Simplex couplings (R-2) and original Hornby Dublo (TM) couplings. Moulded in brown plastic to resemble check rails. Can also be used with 0-16.5 track.

Decoupler RH type

For use with the tension lock couplers fitted to Hornby(TM), Bachmann(TM), Dapol(TM) etc. rolling stock on Peco Streamline Track.

Conducting Rail Joiners

Z Gauge Code 60 - Small Scale Flexible Track
A gauge of just 6.5mm and a model scale of 1.5mm/1ft means if you want to model big landscapes where the trains are dwarfed by the scenery and yet keep it to a manageable size, Z gauge could be the answer.

Flexible Track with Wooden Sleeper

Z Gauge Code 60 - Small Scale Flexible Track
With a gauge of just 6.5mm and a model scale of 1.5mm/1ft, this is currently the smallest practical size for building a working model railway. If you want to model big landscapes where the trains are dwarfed by the scenery and yet keep it to a manageable size, Z gauge could be the answer.

Buffer Stop, Welded Steel Box

This 12mm gauge track system is accurately modelled in H0 on the metre gauge track found in Europe, most notably in Switzerland. It is also useful for modelling the 3ft 6ins track found in southern Africa, Japan, Australia, Norway and parts of South America; in 4mm scale the gauge is correct for the many 3ft gauge lines formerly found in Ireland and the Isle of Man. This versatile track could also be used for modelling in TT (3mm/ft scale)

Buffer Stop, Rail-built

This 12mm gauge track system is accurately modelled in H0 on the metre gauge track found in Europe, most notably in Switzerland. It is also useful for modelling the 3ft 6ins track found in southern Africa, Japan, Australia, Norway and parts of South America; in 4mm scale the gauge is correct for the many 3ft gauge lines formerly found in Ireland and the Isle of Man. This versatile track could also be used for modelling in TT (3mm/ft scale)

Track Fixing Pins

14mm, chemically blackened mild steel.

Bullhead OO Gauge Rail Joiners

These authentic looking rail joiners incorporate bolt detail, and complement the fine scale appearance and detail of our 00 Code 75 Bullhead track range.

Transition Tracks

For use between sections of Code 100 and Code 75 track, so for example could be used to incorporate a Code 75 Asymmetric 3- way Turnout (SL-E199) into a Code 100 layout, or to connect a Code 100 Streamline or Setrack 'fiddle yard' to a Code 75 scenic section.

Normally conductive; although the electrical connections between the 2 rail types can be cut to provide an electrical break. Supplied in a pack of 4.

Bullhead 00 Gauge Streamline Track

Bullhead track has been in use on the railways since the earliest times, and is still very much in evidence today. This flexible track provides a highly detailed and faithful 00 scale replication of this long standing feature of Britain's railways.

Our SL-114 Bullhead Rail Joiners include bolt detail and therefore complement the fine detail of this track range.

Rail Joiner

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500) track systems.

Turntable HOm

Kit contains detailed plastic parts, rail and electrical contacts, plus full instructions. It may be assembled as a traditional open well type or with an all-over riveted steel deck, an essential feature in areas subject to heavy snow fall. A motorising kit will be available soon.

Frog and Check Rail Kit

1 set of Frog and Wing Rails for the construction of turnouts, using Code 250 Flat Bottom rail.

Wood Grain Sleepers

12 Sleepers approx 125mm long plus 12 end caps for track and turnout construction.

Code 250 Flat Bottom Rail

6 914mm lengths of Code 250 Flat Bottom Rail for track and turnout construction.

Code 83 Flat Bottom Rail

6 914mm lengths of Code 83 Flat Bottom Rail for track and turnout construction.

Code 200 Bullhead Rail

6 914mm lengths of Code 200 Bullhead Rail for track and turnout construction.

Code 143 Flat Bottom Rail

6 914mm lengths of Code 143 Flat Bottom Rail for track and turnout construction.

Code 124 Bullhead Rail

6 914mm lengths of Code 124 Bullhead Rail for track and turnout construction.

Cosmetic Fishplates

12 cosmetic fishplates to use at joints between Code 124 and Code 143 rails.

Wood Grain Sleepering

20 175mm lengths of wood grain effect sleepering for track and turnout construction.

Slide Rail Fastenings (Pack of 48)

50 injection moulded chairs for the construction of turnouts, using Code 143 Flat Bottom rail.

Pandrol Rail Fastenings (Pack of 100)

100 injection moulded rail clips on baseplates for the construction of turnouts and plain track, using Code 143 Flat Bottom rail.

Frog, Wing and Check Rails

1 set of Frog and Wing Rails for the construction of turnouts, using Code 143 Flat Bottom rail.

Turnout Blades/Brackets

1 set of Turnout Blades and Brackets for the construction of turnouts, using Code 124 Bullhead rail.

Frog and Wing Rails

1 set of Frog and Wing Rails for the construction of turnouts, using Code 124 Bullhead rail.

Slide Rail Chairs

50 injection moulded chairs for the construction of turnouts, using Code 124 Bullhead rail.

Running Rail Chairs

100 injection moulded chairs for the construction of turnouts and plain track, using Code 124 Bullhead rail.

Code 70 Flat Bottom Rail

Individulay components for building track.

Code 100 Flat Bottom Rail

Individulay components for building track.

Code 80 Flat Bottom Rail

Individulay components for building track.

Code 75 Flat Bottom Rail

Individulay components for building track.

Rail Spikes

Square section (non turning) rail spikes, for fixing down rail.

Concrete Sleepers

96 sleepers 32mm long and 3.5mm wide at base (3mm at top) with 200 separately moulded rail fixings. Moulded in realistic concrete colour plastic, the rigid 6 sleeper units enable straight track to be accurately and easily laid. For curved track simply cut the webs joining the sleepers on one side. Assemble using the Peco 3- Way Track Gauge (IL-116) and liquid styrene cement.

Conductor Rail Chairs

For adding 3rd and 4th Conductor rails to existing track as found on Southern, Merseyside and London Transport systems, for example. Use IL-1 Code 60 rail with these chairs

16.5, 18.2 and 18.83mm Track Gauge

Track gauge for 16.5,18.2 and 18.83mm gauges.

Turnout Sleepers

Approx. 32 brown moulded plastic sleepers lengths each 88mm x 4mm. Superb components with which to build your own fine track and turnouts to 16.5mm, 18.2mm and 18.83mm gauges.

PAGE

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.