SORT BY
PAGE
  • 1

56 Products Found

10.5mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

9mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

Driving Wheels 15mm diameter, 15 spoke Non insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 15mm diameter, 15 spoke Insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 14mm diameter, 15 spoke Insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

3/64in Phosphor Bronze Strip

A useful item for making items such as your own electrical pick ups for locomotives and illuminated rolling stock.

3/32in Phosphor Bronze Strip

A useful item for making items such as your own electrical pick ups for locomotives and illuminated rolling stock.

Driving Wheels 13mm diameter, 10 spoke Non insulated, Flanged RP25 Profile

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

60:1 Ratio 1/8" Bore (Gear) 3/32" Bore (Worm) Gear and Worm Set

Brass gear wheels and steel worms, drilled and tapped with 10BA fixing screws.

Driving Wheels 21mm diameter, 16 spoke Non insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Grub Screw, short 10BA

To fit 10BA Worm

Driving Wheels 14mm diameter, 10 spoke Non insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 15mm diameter, 10 spoke Non insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 18mm diameter, 18 spoke (Crewe) Non insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 22mm diameter, 18 spoke Non insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 32mm diameter, 24 spoke Non insulated, Flanged

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 14mm diameter, 10 spoke Insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Driving Wheels 15mm diameter, 10 spoke Insulated, Flangeless

Romford driving wheels are made from cast metal with nickel silver tyres. These precision made wheels fit special squared axles that eliminate all risk of slipping and being out of gauge, and provide for accurate quartering. Manufactured to conform to META standard dimensions and threaded 10BA.

Jackson/Romford 5.1mm 7 Spoke Wheels

009 wheel sets. Blackened metal tyres on plastic centres on steel pin point axles.

Jackson/Romford 5.5mm 6 Spoke Wheels

009 wheel sets. Blackened metal tyres on plastic centres on steel pin point axles.

Jackson/Romford 6.2mm 7 Spoke Wheels

009 wheel sets. Blackened metal tyres on plastic centres on steel pin point axles.

Jackson/Romford 7mm Disc Wheels

N Gauge wheel sets, also suitable for 009. Blackened metal tyres on plastic centres on steel pin point axles.

Jackson/Romford 6.2mm 8 Spoke Wheels

N Gauge wheel sets, also suitable for 009. Blackened metal tyres on plastic centres on steel pin point axles.

Jackson/Romford 6.2mm 3 Hole Disc Wheels

N Gauge wheel sets, also suitable for 009. Blackened metal tyres on plastic centres on steel pin point axles.

Jackson/Romford 6.2mm Disc Wheels

N Gauge wheel sets, also suitable for 009. Blackened metal tyres on plastic centres on steel pin point axles.

Jackson/Romford 5.1mm Disc Wheels

N Gauge wheel sets, also suitable for 009. Blackened metal tyres on plastic centres on steel pin point axles.

3 Link Brass Couplings

Barrel Plated. Three-link chain couplings, with no means of drawing the wagons together, were used to form the peculiarly British "loose coupled" freight train: since such trains were not fitted with an automatic through-train braking system there were no pipes to connect between the vehicles. Control of the train was assisted by the guard's van at the rear of the train, or in certain cases a series of vans spaced along the train, which kept the couplings taut and therefore also helped prevent snapped couplings. Such trains travelled at low speeds and were finally phased out in the 1970s.

16mm Tender Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Tender Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Disc Coach Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Spoked Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm 3 Hole Disc Wheel

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Disc Brake Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Disc Brake Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

10.5mm Spoked Tender Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Mansell Coach Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

Plain Brass Bearings, Flush Fitting

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

Shouldered Brass Bearings

Type 1, Shouldered pin-point brass bearings. Pack of 50.

14mm Bogie Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

16mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Bogie Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

Screw Brass Couplings

Barrel Plated, Dummy screw.

16mm Bogie Disc inside Bearing

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

14mm Bogie Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

12mm Bogie Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

10.5mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

9mm Disc Wheels

The 00/H0 spoked wheels are cast, giving an accurate spoke profile, then turned and nickel plated. Disc and 3-hole wheels are turned in brass and plated. All wheels are insulated on both sides. Bogie wheels are mounted on axles for inside bearings, all other wheels are mounted on pin point axles.

PAGE
  • 1

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.