SORT BY
PAGE

198 Products Found

OO-9 4 Wheel Enclosed Side Coach Red

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain red vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching open sided coach (Ref. GR-520UR) and a brake coach (Ref. GR-530UR) are available; all three vehicles are also produced in plain green (Ref GR-500UG, GR-520UG, & GR-530UG).

OO-9 4 Wheel Enclosed Side Coach Green

These delightful ready to run coaches are based on those used on the Glyn Valley Tramway. This plain green vehicle is ideal for a modeller who wishes to create their own imaginary narrow gauge line, or for those wishing to adapt them to suit another prototype. A matching open sided coach (Ref. GR-520UG) and a brake coach (Ref. GR-530UG) are available; all three vehicles are also produced in plain red (Ref GR-500UR, GR-520UR, & GR-530UR).

Starter Track Set - OO-9/HOe Gauge

This pack contains:

  • 6 x ST-401 Standard Straights
  • 2 x ST-411 Double Straights
  • 1 x ST-413 Double Straight (Wired)
  • 5 x ST-403 1st Radius Standard Curves
  • 6 x ST-412 1st radius Double Curves
  • 1 x ST-405 Right Hand Turnout
  • 1 x ST-406 Left Hand Turnout
  • 2 x SL-440 Buffer Stops
  • 1 x OO-9 Planbook

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

OO-9 Bogie Open Wagon Brown

Based on our GR-231 Lynton & Barnstaple wagon (SR Livery) No 28313, this is an unlettered version for those who wish to create their own narrow gauge system or emulate another. Although unbranded, it still features the legally required weight and tare markings and strapping detail, plus separately-fitted brake levers and vacuum brake pipes. As with all of our previous models in this scale, it is free running and complete with couplings, which plug into the integral NEM pocket.

OO-9 Bogie Open Wagon Grey

Based on our GR-230 Lynton & Barnstaple wagon No 22, this is an unlettered version for those who wish to create their own narrow gauge system or emulate another. Although unbranded, it still features the legally required weight and tare markings and strapping detail, plus separately-fitted brake levers and vacuum brake pipes. As with all of our previous models in this scale, it is free running and complete with couplings, which plug into the integral NEM pocket.

Turnout (Mainline Sleepers), Medium Radius, Left Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range emulates many narrow gauge lines found around Europe which are built to main line standards. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Turnout (Mainline Sleepers), Medium Radius, Right Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range emulates many narrow gauge lines found around Europe which are built to main line standards. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

SL-E497 Plan Sheet

Turnout, Medium Radius, Right Hand

SL-E492 Plan Sheet

Turnout (Irregular Sleepers), Small Radius, Left Hand

SL-E491 Plan Sheet

Turnout (Irregular Sleepers), Small Radius, Right Hand

Y Turnout, Medium Radius

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is fully compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Turnout (Irregular Sleepers), Small Radius, Right Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Turnout (Irregular Sleepers), Small Radius, Left Hand

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is compatible with the Peco 009 Setrack rigid track system. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.

Flexible Track Mainline Sleeper

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range emulates many narrow gauge lines found around Europe which are built to main line standards. It is compatible with the Peco 009 Setrack rigid track system.

Flexible Track Irregular Sleeper

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range depicts the slightly worn out old track of a picturesque old railway. It is fully compatible with the Peco 009 Setrack rigid track system.

Double Straight

A Double Straight with soldered power feeds. For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system. The ST-413 is a double straight which has been pre wired to allow power to be easily delivered to the track with power feeds ready soldered to the rails - easily extended using PL-39 Terminal Blocks and PL-38 Red and Black Wire.

Ffestiniog Rly Slate Wagon

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

Glyn Valley Tramway 4ton Mineral Wagon

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

4 Wheel Coach 2 Compartments

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

Standard Straight

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

Standard Curve, 1st Radius

For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.

OO-9 2 ton Slate Wagon Festiniog Railway

Trains of slate wagons used to be gravity run from the quarries at Blaenau Ffestiniog to the harbour at Porthmadoc, this model pack of 3 ready to run wagons includes 1 braked vehicle and removable slate loads which are conveniently hollow, thus giving the modeller the added option of including some further weight if required.
Roughly one in five wagons was fitted with brakes. These were spread throughout the train and turned so the brake handles were all on the same side of the train, pointing towards Porthmadog. Different colours painted on the side bars denoted the various slate quarry companies; our packs feature random selections of these. As these wagons tend to run in long rakes, the models have semi-permanent close-couplings fitted in their NEM pockets. These can be pulled out with fine nosed pliers and replaced with conventional OO-9 hoop-and-loop couplings (supplied) at each end of the rake.

OO-9 2 ton Slate Wagon Festiniog Railway

Trains of slate wagons used to be gravity run from the quarries at Blaenau Ffestiniog to the harbour at Porthmadoc, this model pack is of 3 unbraked vehicles and has removable slate loads which are conveniently hollow, thus giving the modeller the added option of including some further weight if required.
Roughly one in five wagons was fitted with brakes. These were spread throughout the train and turned so the brake handles were all on the same side of the train, pointing towards Porthmadog. Different colours painted on the side bars denoted the various slate quarry companies; our packs feature random selections of these. As these wagons tend to run in long rakes, the models have semi-permanent close-couplings fitted in their NEM pockets. These can be pulled out with fine nosed pliers and replaced with conventional OO-9 hoop-and-loop couplings (supplied) at each end of the rake.

Lynton and Barnstaple 4 Wheel Open Wagon

These finely moulded plastic wagon kits come complete with pin point axle wheels. Glue and paint will be required, along with appropriate transfers.

PAGE

Trade Login

WOULD YOU LIKE TO BECOME A TRADE PARTNER?

PECO - PLEASE SUPPLY TEXT.
An introductory paragraph with criteria listed as bullets points, closing with contact call to action.