BROWSE PECO PRODUCTS
Browse through our complete product portfolio.
239 Products Found
Tunnel Mouth, Single Track
Pair of detailed Tunnel Mouths, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).
Tunnel Mouth, Double Track
Pair of detailed Tunnel Mouths, with separate wings walls for optional positioning. Matching Stone Walling is also available (NB-40).
Truss Girder Bridge Side
Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack.
Traversing Crane
From the late 1960's the spread of shipping containers revolutionised the transport of goods. On the railways marshalling yards gave way to intermodal depots as containers are transferred between ships, trains and road vehicles. The Rolling Underframe kit (Ref 546A) can be added to transform this unit into a movable crane. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Footprint; Sides 61mm wide X 125mm High, Span 153mm
Train Shed/Locomotive Depot/Engine Shed
Kit consists of parts to build one complete Train Shed Unit which will span two tracks, and can be combined with further units to build a larger facility if required. Inspection pits were often placed in the tracks in these buildings (See LK-56/156). Easily adapted to create a modern building for non railway use.
Traditional Signal Box, Brick/Timber Type
Modelled on the Saxby and Farmer design that was to be found around the country, this kit can be combined with further kits to make a larger signal box if required. Use the Ratio Signal Box Interior kit No. 224 for a 20 lever frame, level crossing wheel and other detail.
Timber Yard
Timber yards and Builders merchants premises offer possibilities of extra variety of traffic into the station goods yard. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Signal Box
Based on the Saxby and Farmer design seen on many railways across Britain. Footprint: 90mm x 56mm + 40mm over staircase. The Ratio Signal Box Interior kit 553 will provide a wealth of interior detail. Don't forget SS89 Point Rodding, SS22 Lamp Huts and, of course, signals! Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Timber Island Platform Station Building
This Island Platform building is designed to be used with the Wills SS61 Platform and SS54 Canopy, and can easily be adapted to make a larger building using additional kits.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm.
Three Arch Viaduct
Can be extended by adding additional kits and the SS83 Piers, or with the SS81 Extra Arch and Pier. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 423mm Long, 124mm Wide and 234mm High.
Telegraph Poles (Pack of 6)
6 Telegraph Poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines.
Telegraph Poles
16 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height 100mm
Tea Kiosk
An extra scene for the station forecourt, industrial area, or layby. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 58mm x 42mm.
Taxi Mens Rest Hut
These distinctive huts were once a common sight in town centres and at larger railway stations. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 93mm x 47mm.
Subway Staircase Kit
As shown, designed to fit into a platform without the need to cut into the baseboard. Can be assembled as two staircases or one of greater depth. Also can be used as a pedestrian subway in a street scene.
Subway Staircase
As shown, designed to fit into a platform without the need to cut into the baseboard. Can be assembled as two staircases or one of greater depth. Also can be used as a pedestrian subway in a street scene.
Stone Walling Sheets, Grey
Plastic sheet emulating Stone Walling which matches the Bridge and Tunnel Mouths NB-31-34. Pack of 4
Stone Type Retaining Arches
Often seen with business premises in them, these Stone Retaining Arches measure 494mm long x 90mm high. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Stone Piers (2)
Additional piers for the SS80 Viaduct kit; can also be used with the Vari Girder (Ref. SS57), Bow (Ref. SS47), Plate (Ref. LK-10) and Truss (Ref. LK-11) Girder Bridge sides to construct a wide variety of ubiquitous viaducts. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 165mm, width 34mm each
Station Platform Shelter with Timber and Brick Huts
This plastic kit contains a platform shelter plus a timber and brick hut.
Station Platform Shelter and Hut, Timber
This plastic kit contains a platform shelter plus a timber hut.
Station Platform Shelter
Designed to complement the SS67 Country Station Building - some shelter for passengers awaiting a train from another platform. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 92mm x 60mm.
Station House, Stone
This kit will make 2 Station houses; assembly can be varied; extra doors and windows are included.
Station House, Brick Type
This kit will make 2 Station houses with single storey extensions; assembly can be varied , extra doors and windows are included.
Station House, Brick
This kit will make 2 Station houses; assembly can be varied , extra doors and windows are included.
Station Halt with Waiting Room
A spartan passenger station seen in rural areas, a shelter is provided for waiting passengers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 220mm x 50mm.
Station Halt
A spartan passenger station seen in rural areas. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 185mm x 30mm.
Station Garage
A 1930's style garage and petrol station. Pumps included. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 114mm x 84mm.
Station Forecourt Shops
A parade of shops for the station approach or under the railway embankment. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 138mm x 9mm
Station Canopy
This 180mm long and 60mm wide Canopy is designed for use with the SS61 Platform sections and SS78 Island Platform building, but can be used with any suitable platform system. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Station Building, Brick Type
The pre coloured parts of this plastic kit can be assembled in a number of ways ; further kits can be combined to make a larger structure if required.
Station Barrow Crossing
Placed at the foot of platform end ramps, barrow crossings allow light goods and luggage to be transferred across a double track to an adjoining platform by railway staff. Glue and paints required to complete model.
SR/BR Station Seats
Kit for 4 seats, a post war steel and timber design which originated on the Southern Railway.
SR Loading Gauge
After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Small Gents Toilet
This kit includes 2 of these basic but often welcome structures. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 44mm x 26mm each.
Signal Box Interior
Adds the finishing touches to any signal box (See Ratio 500, 503, 536, 552 and Wills SS48 kits); it contains all you need to fit out a typical signal box including a 20-lever frame and a level crossing operating wheel. Glue and paints required to complete model.
Signal Box
This pre coloured plastic kit is modelled on the iconic BR design built at Potters Bar in the 1950's. Full instructions included.
Scrapyard
This scrapyard kit includes a stone shack and some ready made scrap.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 98mm x 46mm
Rustic and Picket Fencing
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
• 864mm of Rustic Fencing
• 1272mm of Picket Fencing
Round Top Windows
Scratch and Kit builders accessory pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This kit includes:
• 9 35mm high, 21mm wide Round Top Window Frames
• 4 134mm long, 77mm high English Bond Brick Sheets (Matches SSMP227) each with 2 semi prepared Round Top Window Apertures
• 8 Semi - Circular brick arches - Internal Diameter 20mm, External Diameter 33mm
• Clear plastic glazing
River/Canal Bridge
Ideal for bringing a road or path over a small river or canal. The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.
Retaining Walls
Often seen supporting railway cuttings and embankments in urban areas where there is insufficient space for earth slopes. Make cuttings, yard walls or raised railway viaducts with these versatile sections. Supplied with pre-coloured parts although painting and/or weathering can add realism (See the Pecoscene Weathering Powder range PS-360 - 365); glue is required to complete this model. Length 350mm, Height 45mm
Relay Boxes
A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.